For those who have used different routers and Wi-Fi extenders, you must be aware of the fact that many routers and Wi-Fi extenders require you to connect them to a computer and follow a specific and complicated setup process. TP-Link Wifi Extender, This is because the majority of the routers come with their own software that’s used for configuration, and therefore, you must install the software before using the router.
On the other hand, a Wi-Fi extender does not have its own software, therefore, you must follow a specific and complicated process to set it up, in order for it to work with your existing wireless network. However, this is not the case with a TP-Link Wi-Fi extender. TP-Link has come up with a different way to set up the TP-Link Wifi Extender that requires you to connect it to a power outlet using an Ethernet cable, instead of a computer. This also means that you will not have to install any additional software in order to use it. This article will take you through the process of connecting a TP-Link Wifi Extender using a WPS button, instead of a computer or mobile device.
A WPS button is a small device that you can stick on the back of your wireless router. It’s usually a small button that you need to press in order to connect your router to your modem. The WPS button is a standard part of most wireless router models and not specific to a certain brand. It is mainly found on wireless routers manufactured by different brands, including Belkin, D-Link, etc.
You can also find WPS buttons on some wireless access points and modem/routers. A WPS button is used to simplify the process of setting up a new wireless network. What makes a WPS button so great is that it requires no additional software in order to be used; all you need to do is push a button, and you’re done.
The first step is to plug the Ethernet cable of the Wifi Extender into the WAN port of your modem. Make sure that the Wifi Extender’s WAN port is set to a wider bandwidth than the one provided by your modem, as it should be in order to maximize your internet speed.
Now, turn on the power of the TP-Link Wifi Extender Setup. Once it’s powered on, you will have to connect it to your modem, just as you did with your modem’s WAN port.
After that, you’ll have to press the WPS button on the back of your device, which is the WPS button on the back of your Wi-Fi extender. Once you press the button, the TP-Link Wifi Extender will attempt to connect to your wireless router, and if it succeeds, it will establish a connection with the strongest signal it can detect. In order to do so, it will turn off all the other devices that are currently connected to your wireless network, and therefore, you’ll have to press the WPS button on your wireless router, too, in order for the connection between the two to be re-established.
If you’re in a situation where you don’t have an extra button to press, you can also use a computer and plug the computer’s USB port into the WAN port of the TP-Link Wifi Extender, in order for the computer to serve as a WPS button.
After that, you’ll have to connect your TP-Link Wifi Extender to your wireless router using an Ethernet cable. This is because the TP-Link Wifi Extender will only work if it’s connected to your modem via an Ethernet cable. Your modem acts as the central piece of equipment that will allow the devices connected to it to share internet.
Now, you’ll have a wired connection between the modem and the Wi-Fi extender. It’s very important that you do not connect the Wi-Fi extender to your modem while they are connected to the same power source. Doing so can damage your modem, and therefore, reduce its transmission speed and create additional problems, such as a high electric bill.
And finally, you’ll have to configure your new Wi-Fi extender with the SSID and password of your existing wireless network. This will allow the devices in your home to connect to the internet, including the devices that are connected to your old Wi-Fi network, via the new Wi-Fi extender.
You can easily access this connection in a few different ways. You open a web browser and type in the IP address of the router (usually, this is http://192.168.0.1). Enter the username and password that you use to log in to your router.
If you don’t remember the password, you can easily access the login page again by clicking on the “routerlogin” link that’s located in the bottom left-hand corner of the web browser window. From there, you can easily change the password.
That’s it! Your TP-Link Wi-Fi Extender is now setup and ready to use! You can now enjoy the benefits of a strong and reliable wireless connection, without having to deal with the hassles and complications that come with setting up a router or Wi-Fi extender by hand.
When you choosing the TP-Link Wifi Extender, make sure that it is one that is approved by the IEEE 802.11 standard. This will ensure that your data is secure and transmitted using a secure protocol.
Also, make sure that the coverage area of the extender (as well as the range of the extension cable) matches the size of your home or building. If you have a large home, you may want to consider purchasing two or more extenders in order to extend the range and coverage of your wireless network.
You can also purchase a TP-Link Wifi Extender that supports beam-forming technology. If you want to save some money, you can purchase a refurbished or used TP-Link Wifi Extender. This will allow you to save a few bucks, while still benefiting from the extended range and coverage of a new extender. However, make sure that you purchase from a reliable and trustworthy source, as there are many fraudulent sellers who sell fake and imitation products, including refurbished and used Wifi extenders.
If you’re in the market for a new Wifi extender, you’ve come to the right place; this buyer’s guide will walk you through everything you need to know before purchasing a new Wifi extender. We’ll discuss the different types of Wifi extenders, as well as their features and benefits, and help you decide which one is right for you. .